EN
ar
bg
hr
cs
da
nl
fi
fr
de
el
hi
it
ko
no
pl
pt
ro
ru
es
sv
tl
iw
id
lv
lt
sr
sk
sl
uk
vi
et
hu
th
tr
fa
ms
hy
ka
ur
bn
mn
ta
kk
uz
ku
piezoelectric accelerometers
Kingmach piezoelectric accelerometers are designed for dynamic measurement tasks such as acceleration, vibration frequency, ground pulsation, structural response, and cable vibration. The category supports mechanical vibration analysis, earthquake monitoring, and structural dynamic characteristic studies. In practical use, the sensor is paired with acquisition and analysis equipment so engineers can review time curves, frequency behavior, and event records. The important point is whether the system captures the motion that affects the project, rather than how many specifications appear in one sentence. For bridges, buildings, tunnels, railways, machinery, and geotechnical sites, that means matching sensor placement, acquisition method, and review workflow to the expected vibration source. A well-planned dynamic system also defines how data will be named, stored, compared, and acted on after an event. This keeps acceleration monitoring connected to engineering review rather than leaving it as a separate technical trace.
For high-risk assets, inspection timing should follow events as well as calendar dates. After impact, blasting, severe weather, unusual vibration, or equipment maintenance, the sensor and the data path both deserve a quick check.
For field teams, the record is strongest when the waveform is tied to a named event and a known physical point. The note should state what was operating, what changed on site, whether other instruments reacted, and whether the motion repeated under similar conditions.
Application of piezoelectric accelerometers
Earthquake and ground-motion monitoring use Kingmach piezoelectric accelerometers to capture low-frequency or sudden dynamic movement in ground and structures. The value lies in recording timing, direction, and response pattern during events that cannot be repeated on demand. Sensor installation should be stable, protected, and documented before the event occurs. The monitoring plan should define which records are saved automatically and how the event is reviewed afterward. When ground motion data is combined with structural response and inspection findings, it becomes part of risk assessment instead of a stand-alone waveform. A site may look unchanged after an event, but the dynamic record can help decide whether hidden response deserves inspection.
Seismic records also need a different review rhythm from routine vibration. The important questions are where the motion was strongest, which direction dominated, whether nearby structures responded, and what inspection evidence appeared afterward. The report should preserve event time, point location, field condition, and any follow-up finding.
For long-term ground-motion stations, quiet periods are part of the value. They confirm that the system is ready before the next event and provide a reference for background activity. After an event, that reference helps engineers judge whether the recorded movement was unusual for the site.
The future of piezoelectric accelerometers
Future Kingmach piezoelectric accelerometers will make vibration comfort and serviceability easier to discuss. Buildings, footbridges, platforms, and machinery areas may be structurally safe but still produce uncomfortable or disruptive motion. Acceleration records can help describe the movement in a way that inspection notes alone cannot. Future reporting tools may connect measured vibration with occupancy, machinery state, traffic timing, and maintenance actions. That will help owners decide whether a response is acceptable, needs observation, or requires a physical change. Clear dynamic records also help communication between technical teams and non-specialist stakeholders who need understandable evidence.
Comfort review should be written in plain operational language. A report may need to show when the motion happened, who noticed it, what equipment was running, and whether the same condition appears every day or only during unusual work. This makes the result useful to building managers as well as engineers.
Serviceability records should also separate perception from risk. A motion may disturb occupants without indicating damage, while a quiet but changing dynamic pattern may deserve technical attention. Future reporting should help teams keep those two questions separate.
Care & Maintenance of piezoelectric accelerometers
Axis control keeps Kingmach piezoelectric accelerometers records understandable. A sensor may be installed vertically, longitudinally, laterally, or in three directions depending on the monitoring task. If the axis direction is not written down, later reviewers may not know what the waveform represents. Mark the direction on drawings, photographs, and channel names. If a sensor is removed and reinstalled, confirm the direction again. Axis mistakes can create years of confusing data, especially on bridges, towers, tunnels, and machinery foundations. A simple label at installation can prevent serious interpretation problems later.
Dynamic data can be sensitive to small field changes. A new bracket, nearby machine, temporary work platform, changed cable route, or software update can alter the record, so those changes belong in the maintenance history.
For owner handover, the file should include point photos, axis labels, acquisition settings, related structural channels, and examples of normal behavior. That helps future reviewers understand whether a later event is unusual.
Kingmach piezoelectric accelerometers
Kingmach piezoelectric accelerometers support structural health monitoring by turning motion into a reviewable data trail. For bridge and building work, the data may help identify dominant frequency, cable behavior, vibration level, and response after an impact or construction event. For ground and earthquake studies, the record may show pulse timing and motion intensity. For machinery and industrial structures, repeated patterns can point to operating conditions or resonance. The monitoring plan should define what counts as normal, what requires field inspection, and which related sensors should be checked before making a decision. This prevents the vibration record from becoming an isolated curve and makes it part of a structured review process.
For owner handover, the file should include point photos, axis labels, acquisition settings, related structural channels, and examples of normal behavior. That helps future reviewers understand whether a later event is unusual.
Weak-vibration review should include nearby walking, wind, traffic, equipment start-up, and construction activity because these sources can influence the trace. People walking nearby, wind, traffic, equipment start-up, and construction work can all influence the trace, so the field note should capture what was happening around the point.
FAQ
Q: How should a sensor position be selected?
A: Place it where the structure actually moves and where the record answers a clear engineering question.
Q: Why is mounting important?
A: Loose mounting can create a false vibration signal, so the sensor must be fixed to a stable surface.
Q: Why does axis direction matter?
A: The waveform only has meaning when reviewers know whether it represents vertical, lateral, longitudinal, or multi-direction motion.
Q:What should be recorded at installation?
A: Record point name, mounting face, axis direction, cable route, acquisition channel, first test record, and photos.
Q: Can sensors be moved after installation?
A: They can, but the move date, reason, new position, and new baseline test should remain visible in the record.
If the reading changes suddenly, the first check should include the sensor attachment, cable route, connector, channel name, and recent field activity. This prevents a maintenance issue from being mistaken for structural behavior.
Reviews
Matthew Garcia
Instrumentation cables are durable and perform well even in harsh environments. Will definitely order again.
Ryan Lewis
Fast delivery and excellent product quality. The accelerometers and tiltmeters are highly reliable. Strongly recommend this company.
Latest Inquiries
To protect the privacy of our buyers, only public service email domains like Gmail, Yahoo, and MSN will be displayed. Additionally, only a limited portion of the inquiry content will be shown.
Evelyn***@gmail.comSouth Africa
Hi, we are a contractor working on tunnel construction and need settlement sensors and displacement ...
Isabella***@gmail.comGermany
Hello, we are evaluating weir flow meters for a water management project. Please share accuracy deta...